Norland Int'l Inc

Каталог Оборудования Potomac English

The Bottled Water Business
Small bottle filler options
Packaging Equipment
Commercial Distillation Systems
Bottle Washers Fillers & Cappers
Ozone Generating Systems
Pre-treatment Systems
Blow Molding Equipment
Engineering Services
Supplies-caps, preforms, labels, etc.
Sales & Marketing Assistance
Success Guide
User Survey
User Survey

 OZ27 Bottled Water Ozone System 

Standard System Features:

  • Air Cooled, Corona Discharge Ozone Generator
  • 55 Gallon Stainless Steel Contact Mixing Tank
  • Venturi Injector with By-Pass
  • Automatic, High Capacity Oxygen Generator
  • Stainless Steel Frame
  • Schedule 80 PVC Plumbing Components
  • Produces up to 4.4 grams per hour
  • LED Status Indicators
  • Limited 12 month warranty

Norland Ozone Systems are complete frame mounted modules designed specifically for high quality bottled water operations and can produce enough ozone to treat up to 27 gallons per minute. Larger systems are available upon request. These compact systems are designed to keep ozone residual levels from 0.1- 0.4 MG/L. The OZ27 utilizes an air cooled, patented, "Cold Spark" Corona Discharge Generator. This technology allows the production of high concentration of ozone with little heat generated - eliminating the need for additional water cooling mechanisms for the ozone tubes.

As with all Norland systems, the OZ27 is reliable, cost efficient and easy to maintain. The product water is drawn from a storage tank by the stainless steel Repressurization pump supplied with the system. The pressurized product water is then injected with ozone gas through the Mazzei Injector.

The system is designed to provide effective mixing and "Mass Transfer" of the ozone and product water prior to entering the filler. The stainless steel contact tank further increases the level of ozone in the product water by blending together, under pressure, the molecules of ozone to the molecules of water.


Ozone is an unstable, colorless gas, a powerful oxidizer and a potent germicide. It has a much higher disinfection potential than other disinfectants such as chlorine.

Ozone consists of three parts of oxygen. Once ozone is generated, it takes a short time for it to break apart and return to its natural form of oxygen. As this phenomenon occurs, the free atom of oxygen will seek out any foreign particles in the water and be attracted to them. This action creates an environment where bacteria or organic matter virtually disintegrate when they come in contact with this free oxygen molecule. This in turn protects water from waterborne, bacterial contamination. Ozone is used in the bottled water industry because it controls the growth of bacteria in water. It is desirable because it can do this without leaving a residual taste, such as you would find with chlorine.

The variables determining the effectiveness of ozone in killing bacteria are contact time and residual ozone concentration achieved in the product water. This ozone concentration residual is first dependent on how much ozone is injected into the product water and then the amount of ozone demand in the water. The lower the total dissolved solids level, the higher the solubility of the ozone.

Equipment Specifications


Actual Size

Shipping Specs

60" (152 cm)
70" (178 cm)
36" (91 cm)
42" (107 cm)
46" (117 cm)
52" (132 cm)
390 lbs (177 kg)
485 lbs (220 kg)

Electrical Specifications:

Voltage 220/240 volt

Phase: single

Amps: 25 connected load
Эксклюзивный представитель Norland Int'l Inc.
Компания POTOMAC Тел:   (499) 272-1850;  272-1851
Каталог оборудования POTOMAC: 

Copyright © 2003 Norland Int'l Inc. All rights reserved.